6000A switching mode power supply

,

Rectifier 6000A

Parameters:

Input voltage: Three phase AC380V±15% or single phase AC220V±15% 50Hz 60Hz;
Output current: 0-20000A  optional 100%continuously adjustable designed by your requirements;
Output voltage: 0-400V optional 100%continuously adjustable designed by your requirements;
Output range: Output voltage:0~rated value. (no limited);
Output current: 0~rated value.( no limited);
Efficiency: More than 90%;
Control mode: PWM Pulse control;
Cool mode: Forced by air cooling;
Voltage stability: Within1%;
Current stability: Within1%;
Control accuracy: Rated value within±1%;
Operation mode: Constant voltage, Constant current, output adjustment, ON/OFF, soft start and so on.Designed by your requirements;
Work load: 100% full load continuous running, If more than 1,000 meters above sea level, it will be reduced load operation;
Working condition: Indoors better with ambient Temperature range from -10 °C to 40 °C is good for device ,Less than 90% humidity(when ambient temperature is 20°C±5°C);
Display: Digital meters or touch screen, Ampere hour meter, timer alarm ,etc, Designed by your requirements;
Signal interface: PLC 4-20mA, 0~5V, 0~10V, RS485 or RS232 Designed by your requirements;
Complete functions: The self-protection function of over current, short circuit,overheating, phase lack, etc. Easy to maintain;
Warranty: At least One year from delivery against manufacturing defects, material defects and workmanship fails. Warranty does not cover mishandling, misuse and any operation outside working conditions;
Reasonable design, more safe and durable, separate from the harsh environment.

Portable plating experimental power supply

,

Portable plating experimental power supplyPortable plating experimental power supply usage:

This product is based on actual production of plating and electroplating additive manufacturers to research and develop, which is especially for portable, used for production site Hull tank test plate and tank solution failure analysis.

Portable plating experimental power supply features:

Portable plating experimental power supply has features of small volume, portable, simple operation, digital display, etc.; therefore has been widely used to study the impact of solution main component and additives, to find out the cause of solution failure and so on. That is an essential laboratory test equipment for electroplating technician and plating additive manufacturers home coating solution maintenance, monitoring, modification and analysis.

Portable plating experimental power supply technical parameters:

Input voltage: 220V±10%(AC),50~60Hz;

Output DC voltage: 0-12V,0-15V(DC) (Two options);

Output DC current: 0-10A,0-20A(DC) (Two options);

Measurement timing range: 99 hours 99 minutes 99 seconds;

Input power: 30w~330w;

Dimensions: 250mm×210mm×120mm (including foot pad and terinmals);

Main functions: 1, stepless adjustment; 2, digital voltage and current; 3, digital timer; 4, constant voltage/constant current;

5, timing alarm function; 6, air agitation; 7, tank heating; 8, soft start; 9, protection for current limiting, over-current, short circuit.