Listed power supply output current from 100A-30000A each type details description, the mostly output voltage is 0-12V.

1500A Plating rectifiers

Plating rectifiers 1500A

1500A Plating rectifiers

Plating rectifiers installation and commissioning:

  • Place plating rectifiers and keep the body stability; ensure good ventilation, make sure within 0.5m around don’t have anything; in order to improve the life of plating rectifiers power supply should try to avoid direct exposure to dust or in full corrosive gases in the air, and should stay away from producing heat and wet areas. Ambient temperature between 25 ℃ to 40 ℃, air humidity of 5% to 70%.

Check plating rectifiers out cover:

  • Check plating rectifiers out cover if loosing, and check each power end whether damaged during transport, the three-phase air switch is in off position (Warning: If there is any corruption problems, should promptly contact us, should not rashly turn on the power).
  • Find out plating rectifiers cover if any loosing, make sure the input line without damage during transport, take a good lead, will be far better control line on the uneven parts of the socket and firmly tighten.
  • In the plating rectifiers shell there is ground connection mark: Connecting shell to ground to prevent static electricity.
  • Make power knob counter-clockwise in the end (i.e. the minimum state).

Plating rectifiers power checking:

  • Turn on air switch, then the fan starts to rotate and the power indicator light.
  • Clockwise rotation adjustment button, voltmeter degree increases, working indicate light lighting.
  • Adjust knob to maximum, then the voltmeter should indicate the rated voltage, current meter indicates the load volume accordingly.
  • Disconnect the air switch, turn off the power.

These are the basis for the initial installation and check our plating rectifiers, if some plating rectifiers require special attention when we ship to you at the same time to give special reminder.

Plating rectifiers Specification and parameter:

Plating rectifiers Input voltage Three phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-1500A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

Plating rectifiers packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300

2000A Electroplating power supply

Electroplating power supply 2000A

Electroplating power supply

Our company electroplating power supply characteristics:

  • Electroplating power supply with small size, light weight: the size and weight just about 1/5-1/10 of silicon control rectifier, which it is very convenient for you planning, expansion, moving, maintenance and installation.
  • Energy-saving effect: due to electroplating power supply adopts high frequency switching transformer, the conversion efficiency is greatly improved, under normal circumstances, compared with silicon control rectifier equipment can improve efficiency above 10% or even more, compared with silicon control rectifier at the condition of load rate less than 70% can improve efficiency by 30% and even above.

Electroplating power supply high output stability:

  • Electroplating power supply with high output stability: Because the system response speed (microsecond),it has strong adaptability to electricity network and load changes, the output accuracy can be better than 1%. High efficiency switching power supply, therefore high precision control, then help to improve the quality of electro plating products.

Electroplating power supply waveform easy to modulate:

  • Output waveform is easy to modulate: Due to Our company electroplating power supply high operating frequency, the output waveform adjusting cost relative low, treatment can be more convenient to change according to the users process requirements for output waveform. Thus have a stronger effect to the work site to improve work efficiency, improve the quality of processed products .

Electroplating power supply Specification and parameter:

Electroplating power supply Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-2000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

Electroplating power supply packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
3000A 12 volt dc power supply

12 volt dc power supply 3000A

12 volt dc power supply

12 volt dc power supply repair and maintenance:

In plating machine area, 12 volt dc power supply is commonly type we choose, so to learn some basic knowledge of 12 volt dc power supply is necessary.

Users can adjust 12 volt dc power supply according to request:

Electroplating 12 volt dc power supply during use, the users can do regular inspection and maintenance depending on the environment, according to some of our company experience, here are simple steps to maintain and overhaul the introduction:

  • Before you open the electricity power box, should disconnect the external power supply more than 30 minutes.
  • After open electrical power box, then clean each part dust, can use a dry cloth or brush, also can use compressed air to blow, but pay attention that the pressure don not too high, and so as not to damage components.
  • Check and confirm the power supply is normal, check the air switch segment is reliable.
  • Check the fan work is abnormal, whether there is noises.
  • Check if there is any oxidation on output copper bar or copper cable, if there is any, to treatment timely.

Check 12 volt dc power supply sealing conditions:

  • Check the screws, nuts whether loose without exception.
  • For water-cooling plating 12 volt dc power supply, check if the rectifier machine has water out, check for leaks in the water, retainer should be tightened.

12 volt dc power supply Specification and parameter:

12 volt dc power supply Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-3000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

12 volt dc power supply Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
4000A Rectifier supplier

Rectifier supplier 4000A

Rectifier supplier

Rectifier supplier power supply features:

  • Entirely machine structure closed and sealed water cooling, excellent anti-corrosion, anti-rust, anti-moisture effect, which greatly extended service life. Temperature air-cooled structure, anti-corrosion, which makes it easy to install, and easy to maintenance.
  • Rectifier supplier power supply significant electricity power saving, details data is can save 10% -30% energy, also the efficiency can reach 85% and even more.

Rectifier supplier inspection before delivery:

  • Rectifier supplier all dc power supply machines under rigorous testing and long aging test before delivery, thus our rectifiers can bear day and night uninterrupted full load, high current run, needless to say, our power supplies are real durable, reliable power source for you!

Rectifier supplier advantages:

  • Small size volume, light weight, simple operation, installation and maintenance is very convenient.
  • Rectifier supplier complete protection functions, with phase lack, over-current, over-voltage, short circuit, over-heat protection.
  • Current, voltage and operating time digital display.
  • Working time control, fast protection and automatic shutdown feature.
  • Constant voltage, constant current control options, high value power factor, small pollution to power grid, without interference.
  • Case material: anti-acid, corrosion-resistant, aluminum alloy body production, can significantly increase power life in harsh environments.
Rectifier supplier Specification and parameter:
Rectifier supplier Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-4000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input overvoltage/Undervoltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

Rectifier supplier Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
5000A AC to DC power supply

AC to DC power supply 5000A

AC to DC power supply main working principle:

AC to DC power supply major circuit:

Which the process is from AC current power grid input, and output with DC current output of entire process, including:

1, Input filter device: its role is to filter out power grid existed impurity waveform, at the same time also to prevent impurity generated by AC to DC power supply itself back to the public grid.
2, Rectifier and waveform filter: rectifierying power grid AC current power to smoother DC power supply directly, for the next level of transformation.
3, Inverter: make the rectified DC power supply current into high-frequency alternating current, which this is the core part of high-frequency switching power supply, the higher the frequency, the volume, weight and output power ratio is smaller.
4, Output rectifier and filter: according to the loading needs, providing stable and reliable DC power supply.

AC to DC power supply control circuit:

On the one hand from the output take sampling, compare with the set standards and to control the inverter, change its frequency or pulse width output to achieve output stability, on the other hand, according to information provided by the test circuit, after protection circuit identification, provide control circuit for variety protective measures to whole machine.

Detection circuit of AC to DC power supply:

In addition to providing protection circuit running in a variety of parameters, but also provide a variety of information display instruments.

Auxiliary power:

Providing all the different requirements of a single circuit power supply.

AC to DC power supply

AC to DC power supply Specification and parameter:

AC to DC power supply Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-5000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

AC to DC power supply Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
6000A Switch mode power supply

Switch mode power supply 6000A

Switch mode power supply working principle:

Principle of Switch mode power supply control regulator for voltage stabilization:

Switch knob turn on and off repeatedly to a certain time interval, when the switch is turned on, the input power supply through switch knob and filter circuit to supply loading, during the entire switch turn on duration, the power supply provided energy to loading;
When switch disconnected, input power supply interrupted to provide energy. Be seen, the input power supply to provide energy for load is intermittent, in order to load can be obtain a continuous energy power supply, switching mode power supply must have a energy storage device, when the switch turns on, there is a part of energy stored in the switch, when disconnect, the stored energy will release to load. Inductance used to store energy, when the switch is off, stored energy in the inductance through the diode release to the load, make sure that the load to obtain a continuous and stable energy, because the diode enable load to get continuous current, so called continuous current diodes. This is the way switch mode power supply working.

Switch mode power supply formula:

EAB in the average voltage between AB can be expressed as:
EAB=TON/T*E
TON wherein as each switch turn on time, T is the switching-off working cycle (ie, switch on-time TON and off-time TOFF together value).
By the equation, change the ratio of switch on-time and working cycle, the average voltage between AB also changed, therefore, as the load and input supply voltage changes automatically adjust the ratio of TON and T will cause the output voltage V0 remain unchanged. Changing the on-time working cycle TON proportions and that meanschanging the pulse duty cycle, this method is called as “time ratio control” (Time Ratio Control, abbreviated as TRC).

Switch mode power supply

Switch mode powe supply

Switch mode power supply Specification and parameter:

Switch mode power supply Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-6000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over-voltage/Under-voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

Switch mode power supply  Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
8000A Electrolysis power supply

Electrolysis power supply 8000A

Electrolysis power supply

Electrolysis power supply application:

Mainly electrolysis for non-ferrous metal such as aluminum, magnesium, zinc, lead, copper, manganese and dioxide manganese; gold, silver and other metal smelting; NdFeB rare earth smelting; carbide, diamond smelting; salt water, potassium electrolysis made caustic soda, potash, sodium; potassium chloride electrolysis potassium chlorate, potassium perchlorate; refractories electric heating, as well as other types of high-power electrolysis power supply.

Electrolysis power supply working in industry:

Electrolysis power supply is widely used in metallurgical industry, such as extracting metal from ore or compound (electrowinning) or extracting purified metal (electrolytic purification), and depositing metal (electroplating) from the solution. Metallic sodium and chlorine are produced by electrolysis of sodium chloride melt dissolved; electrolysis sodium chloride aqueous solution will generate sodium hydroxide and chlorine gas. Electrolysis water produce hydrogen and oxygen. Electrolysis of water is the external electric action to split water into H2 (g) and O2 (g). DC electrolysis power supply is a very powerful means of promoting the oxidation- reduction reaction, many difficult redox reaction is implemented by a DC electrolysis power supply. For example: molten fluoride can be oxidized at the anode to elemental fluorine, molten lithium salt is reduced to metallic lithium on the cathode.

Electrolysis power supply importance:

Electrolysis industry plays an important role in the national economy, many ferrous metals (such as sodium, potassium, magnesium, aluminum, etc.) and precious metals (such as zirconium, hafnium, etc.) smelting and metals refining (such as copper, zinc, lead), basic chemical products (such as hydrogen, oxygen, caustic soda, preparation of potassium chlorate, hydrogen peroxide, adiponectin, etc.), as well as electro plating, electrical polishing, anodizing, are achieved by a DC electrolysis power supply.

Electrolysis power supply specification and parameter:

Electrolysis power supply Input voltage 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-8000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over-voltage/Under-voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

Electrolysis power supply Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300
10000A HF rectifier

HF rectifier 10000A

HF rectifier

HF rectifier electroplating power supply usage:

HF rectifier large power switching mode power supply equipment for a range of industry: such as electrochemical plating surface, oxidation electrolysis, electrophoresis process, which is completely different works in the past type of SCR (silicon controlled rectifier).

HF rectifier electro plating principle:

It is by entering high voltage alternating current rectification – high pressure filtering – high voltage high frequency adjustment – low voltage and high frequency method to generate low voltage large current output. So it’s working principle determines has a higher converter efficiency and power factor than SCR (silicon controlled rectifier).

Use this type of HF rectifier can significantly reduce plating costs, improve product quality, compared with SCR power supply, electroplating energy consume savings of 15% –30%, that is bring considerable economic benefits. In addition, hf rectifier has features of small volume, light weight (air cooling is more less than water- cooled type), the installation and operation is very easy, which can save valuable production space for users.

HF rectifier advantages:

HF rectifier power source can be used for electro plating bath of gold, silver, cadmium, copper, zinc, tin and alloys of different materials. Compared with conventional rectifier has unique features: little volume, small size, light weight, high efficiency, high control accuracy. And enhance the dead parts current strength, so the plating workpiece to be plated uniformity, surface smooth, high gloss, etc. Using anti-salt spray acidification measures could increase hf rectifier life in harsh environments.

HF rectifier Specification and parameter:

HF rectifier Input voltage AC 3 phase 380V/415V/440V 50-60Hz
Output voltage 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request
Output current 0-10000A (Random optional)
Voltage stability ≤1%
Current stability ≤1%
Ripple factor 1%-2%
Efficiency ≥90%
 Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling/Water cooling/Oil cooling
Control method Manual/PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

HF rectifier Packing details:

TypeLength (mm)Width (mm)Height (mm)Weight (kg)
50A/12V3503501508
100A/12V42035015010.5
200A/12V45045020018
300A/12V50050022021
500A/12V50050020025
1000A/12V55050028038
1500A/12V60050075060
2000A/12V60050085088
3000A/12V650700850140
4000A/12V6507001100190
5000A/12V7007001450230
6000A/12V7007001700300