Electroplating rectifier application in hard chrome plating

, ,

Electroplating rectifier application in hard chrome plating

Hard chrome plating high frequency electroplating rectifier absorb new technology, adopting international standards do 15KHz frequency pulse as signal source, and high-power IGBT soft-switching resonant converter technology, which are both in the international and domestic leading technology and unique applications constant current technology, constant current control accuracy up to 1 ‰, industry-leading, high-frequency, high-power, pulse width (big working rate) output, the cost performance is much better than similar products. Electroplating rectifier application in hard chrome metal plating case, and can be set two, three level strick hard chrome work method, so the chromium layer uniformity, strong adhesion, and can increase the thickness, showing additional advantage of energy-saving (90% efficiency), save time (takes only two-thirds of original electroplating rectifier, or even shorter), material-saving (raw material can save 30%), high efficiency (each working section can increase capacity of more than one-third).

Three phase electroplating rectifier features:

1. Electroplating rectifier machine adopts antiseptic treatment, sealed control components, each adapter sealed plastics, in order to protect them air corrosion from acid, alkali and salt, to ensure long-term stability working in corrosive environments.
2. Leading international technology, to achieve real high current, high frequency, high working rate pulse output.
3. PVC shell or spray metal shell, beautiful, will not corrode, straight cooling structure, installation and maintenance is very easy.
4. High efficiency (≥90%), a significant electricity saving (saving more than 30%) (6V1500A electroplating rectifier compare with silicon rectifier and SCR, can save electric charge more than $1600/year).
5. Variety control of constant voltage, constant current, steady current, constant power, etc.
6. Current, voltage, working time, frequency meter (optional), return meter (optional) and other all use high precision digital display, with sound and light alarm.
7. Soft start and stop function, with over current, over voltage, less voltage, over temperature, phase loss, less water, and short circuit protection function, high reliability.
8. Before delivery, our electroplating rectifier through rigorous testing and long time aging test, can be at full load day and night, uninterrupted running under high current, the failure rate is very low.
9. Adopting our electroplating rectifier, the plating layer can be more uniform, dense, good finish, enhanced the plated workpieces wear resistance.
10. Short working time, high efficiency, saving raw materials, reduce cost, will help you increase output efficiency multiplied.
11. Small size, light weight, easy delivery.

Phase electroplating rectifier main parameters:

1, Input voltage:220V/380V/440V
2, Frequency: 50Hz/60Hz
3, Efficiency:≥90%
4, Output voltage:0-15V continuously adjustable
5, Output current: 0-3000A continuously adjustable
6, Steady current accuracy:≤1 ‰
7, Steady voltage accuracy:≤1 ‰
8, Ripple wave:≤100mV
9, Insulation resistance:≥10MΩ
12 replies
  1. Sidra
    Sidra says:

    Dear, Sir / Mam,

    We are manufacturer of sanitary ware and one of the leaders in Pakistan.

    We are looking forward to buy the following,
    1. Electroplating Rectifiers.

    1. Voltage: 0-12

    2. Amperes:

    1000 A
    1500 A
    2000 A
    and 2500A
    We found your contact details over the web.

    An expected response shall be appreciated.


    RnD Department

  2. Antonio Carmona
    Antonio Carmona says:

    Hi Chen

    I am looking for an rectifier

    Input voltage : 220v 3phase
    Output voltage: 0-15V continuously adjustable
    Output current: 0-1500A continuously adjustable
    cooling: air cooled

    Please Quote

    Kind regards

  3. Gerhard
    Gerhard says:

    Hi Chen

    I am looking for an rectifier

    Input voltage : 440v 3phase
    Output voltage: 0-15V continuously adjustable
    Output current: 0-1500A continuously adjustable
    cooling: air cooled

    Please Quote

    Kind regards


  4. Abdul Rehman
    Abdul Rehman says:

    We are doing hard chrome plating on motorcycle front fork inner tube. Could you quote for 5000 Amp and 8000 Amps rectifier. Also inform what input current in AC will be drawn by these rectifiers when operated at full capacity of output current of 5000 Amp and 8000 Amps DC.

    We are hot country and ambient temperature could reach 45 C in summers. We are at 380 V, 50 HZ.

    Best regards

    Abdul Rehman
    Karachi Pakistan

  5. Yehuda Blau
    Yehuda Blau says:

    I am looking for Hard Chrome DC Rectifier which can provide 10000-15000 amper current with all the above parameters (except current) . Can you quote me such an Rectifier?
    Waiting for your kind comment

  6. Larry Llanza
    Larry Llanza says:

    Dear Sir/Madam,

    I would like to request your price quotation with technical specification of Rectifiers 1500 Amperes & 6,000 Amperes.

    Hope to receive your reply immediately.

    Thank you,

    Best Regards!

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply