Our company electroplating power supply characteristics:
- Electroplating power supply with small size, light weight: the size and weight just about 1/5-1/10 of silicon control rectifier, which it is very convenient for you planning, expansion, moving, maintenance and installation.
- Energy-saving effect: due to electroplating power supply adopts high frequency switching transformer, the conversion efficiency is greatly improved, under normal circumstances, compared with silicon control rectifier equipment can improve efficiency above 10% or even more, compared with silicon control rectifier at the condition of load rate less than 70% can improve efficiency by 30% and even above.
Electroplating power supply high output stability:
- Electroplating power supply with high output stability: Because the system response speed (microsecond),it has strong adaptability to electricity network and load changes, the output accuracy can be better than 1%. High efficiency switching power supply, therefore high precision control, then help to improve the quality of electro plating products.
Electroplating power supply waveform easy to modulate:
- Output waveform is easy to modulate: Due to Our company electroplating power supply high operating frequency, the output waveform adjusting cost relative low, treatment can be more convenient to change according to the users process requirements for output waveform. Thus have a stronger effect to the work site to improve work efficiency, improve the quality of processed products .
Electroplating power supply Specification and parameter: | |
| Electroplating power supply Input voltage | 3 phase 380V/415V/440V 50-60Hz |
| Output voltage | 6V/12V/15V/18V/24V/36V/48V optional or according to customers’ request |
| Output current | 0-2000A (Random optional) |
| Voltage stability | ≤1% |
| Current stability | ≤1% |
| Ripple factor | 1%-2% |
| Efficiency | ≥90% |
| Stabilization mode | Current stabilization/Voltage stabilization (Switchable easily) |
| Adjustment range | Voltage/Current from 0-100% continuously adjustable within rated range |
| Cooling system | Air cooling/Water cooling/Oil cooling |
| Control method | Manual/PLC |
| Display contents | Voltage meter/Current meter/Working/Over temp/Error, etc.. |
| Protection method | Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc.. |
| Operating temperature | -20-50℃ |
| Ambient temperature | -30-65℃ |
| Ambient humidity | ≤90% |
| Working loading | Full capacity operation, more than 1,000 meters above sea level, reduced load operation |
Electroplating power supply packing details:
Leave a Reply
Want to join the discussion?Feel free to contribute!
Leave a Reply
You must be logged in to post a comment.
Hello,
I need a current source with at least 25V gladly also higher and altogether 8000A. The 8000A can also be divided between several sources. A solution with air cooling or a permanently installed water cooling is preferred. The system must be transportable in one or two units.
With best regards,
Erik
Hello,
We are interested in 15V power supply, 20kW. Input 3-phase, 415V. With current adjustment. How much does it cost + shipping to Slovenia?
Best regards
Looking for a electro playting plant
3000a 12v rectif