Rectifier in South Africa

Our company 1000A rectifier power supply working well in South Africa customer’s plating machine workshop.


Input voltage: 3 Phase, 50Hz, 380V

Output current: 0-1000A adjustable

Output voltage: 0-12V.

The plating power supply working well, South Africa customer is satisfied with our rectifier, and says will purchase more and more.

Plating rectifier

Plating rectifier South Africa

Electroplating rectifier

Electroplating rectifier


Electroplating rectifier greenization:

Electroplating rectifier system greenization have profound meaning:
The first is significant energy-saving, which means save power generation capacity, while power generation is an important cause of environmental pollution, so power saving can reduce environmental pollution; and secondly these power can not (or less) generates pollution to power grid, International Electrotechnical Commission (IEC) has developed a series of standards such as IEC555, IEC917, IECl000. In fact, many power electronic energy-saving equipment, often turn into sources of pollution on the grid: inject to grid of serious harmonic current, make the total power factor drops, so many glitches coupling grid voltage spikes and peaks, even chipping and distortion. In end of 20th century, a variety of active filter and active compensator was born, with a variety of power factor correction method. Laid the foundation for mass production of a variety of green switching power supply in 21 century.

Modern power electronics technology is the basis for development of electroplating rectifier:

Modern power electronics is the basis for development of electroplating rectifier technology. With the continuous emergence of new power electronic devices and adapted to more higher switching frequency circuit topology, modern power supply technology driven by real needs will be rapid developped. In traditional application technique, due to the performance limits of power leaving, switching power supply device performance is affected. Greatly put to good use of characteristics of various power devices, minimize device performance impact on switching mode rectifier, new power circuit topology and new control technology enables power switching at zero voltage or zero current state, which can greatly increase the operating frequency, improve work efficiency of switching mode power supply, then design excellent performance switch mode power supply.

More electroplating rectifier waiting to be developed:

In short, power electronics and switching electroplating rectifier technology continues to move forward due to application requirements, the emergence of new technologies will make many applications replacement products, but also to open up more and new applications. High frequency rectifier switching power supply, modular, digital, greenization etc., will mark these technologies as mature, to realize high efficiency and high-quality electricity application combined. In recent years, with the development of the communications industry, switch power technology as the core of communications switching power supply, only the domestic market demand of more than 20 billion yuan, has attracted a large number of scientific and technical personnel to develop research. Switching power supply instead of linear power and phase control power supply is the trend and will soon be developed. There are many other in switching power supply technology as the core of a dedicated power supply, industrial power are waiting for people to develop.

Electroplating rectifier

Electroplating rectifier



A. Rectifier usage:

Input voltage: AC 110V/220V/AC380V/AC440V (Can be designed based on customers’ requirements). Output characteristics: Constant current/Constant voltage convertible (0~rating value). Output waveform: high frequency square wave, DC and superimposed waveform.

Rectifier is a rectifying device, in brief it is high frequency switching power supply unit which can convert AC (alternating current) to DC (direct current). It has 2 main functions: first, make alternating current (AC) into direct current (DC), supply to load or inverter after smoothing; second, to provide charging voltage to battery. Therefore, rectifiers also act as a charger.

Rectifier high quality components:

Adopts high quality IGBT as main power devices, uses ultracrystalline (also known as nanocrystals) soft magnetic alloy as main transformer core, the main control system uses multi-loop control technology, while in structure adopts acidic salt mist measure. Power supply products structure reasonable, high reliability. Our power supply with advantages of small size, light weight, high efficiency, high reliability and superior performance become SCR (silicon controlled) power supply replacements. Applicable to all kinds of precision surface treatments, such as: experiments, oxidation, electrolysis, zinc, nickel, tin, chrome, optical, smelting, formation, corrosion and other disposal sites. In anodizing machine, vacuum coating, electrolysis plating, electrophoresis, water treatment system, electronic products aging, electric heating, electrochemical and other aspects have also obtained users praise. Especially in PCB plating, electroplating equipment, electrolysis industry, as customers preferred products.



B. Rectifier characteristic:

1, Small size, light weight: size and weight of thyristor rectifier type 1/5-1/10, which is easy for you to planning, expansion, moving, maintenance and installation.
2, Energy saving effect: because of adopting high frequency switching power supply transformer, the conversion efficiency is greatly improved, under normal circumstances, compared with SCR equipment can improve efficiency more than 10%, under load rate of 70% can improve efficiency over 30% more compared with SCR equipment.
3, High output stability: due to system high response speed (microsecond level), our rectifier has strong adaptability to electricity network and load changes, and the output even can accuracy better than 1%. With high efficiency of switching power supply, then high precision control, will improve the quality of products.
4, Easy modulation of output waveform: due to high working frequency, the relatively cost is low of output waveform adjusting processing, can be more easily to change output waveform in accordance with users’ requirements. By this, will have a stronger effect to increase efficiency quality on work site, and improve the processing product quality.

C. Rectifier application features:

1, Reduce porosity, the rate of nuclei formation is greater than growth rate, then prompting nuclei refinement.
2, Improve binding force, make the passive film breakdown, which is favor for strong bond between substrate and coating layer film.
3, Improve coverage and dispersion capacity, high cathodic negative ( electric ) potential can make ordinary plating passivation deposition section site can also deposition.
4, Reduce the internal stress of the coating, improve lattice defects, impurities, voids, build-up, etc., easy to obtain crack-free coating film, reducing additive.
5, Be beneficial to obtain a stable alloy plating coating composition.
6, Improve anode dissolution, no need anode activator.
7, Improve plating coating mechanical properties, such as increasing density, reduce surface and volume resistivity, improve toughness, wear resistance, corrosion resistance and hardness of electroplating coating can be controlled.

Portfolio Items